Enlarged Flap (90mm) Throttle Body Assembly For 2003-12 Dodge Hemi 5.7/6.1L/6.4L. Throttle Body Finish: CNC Machined. Throttle Body Material: Cast Aluminum. Throttle Body Spacer Color: Natural. Throttle Body Spacer Included: No. Enlarged Intake Flap (90mm); Original TBI bore size 80 mm. Increased Air-Flow Over Stock Unit For Add Horsepower (12+) And Torque. Improved Throttle Response And Acceleration. No Tune Required; Relearn Process is needed. Note: Fits all 2003-12 5.7L, 6.1L and 6.4L applications. (Will not fit any 2013/2014 applications at this time). Follow these instructions carefully to ensure correct fitment and operation. Disconnect the negative battery terminal. Disconnect the air temperature sensor plug and. The throttle body control motor plug. Loosen the clamps on the air intake tube and air. Box, and then remove the tube. Remove the four bolts that secure the throttle. Body to the intake manifold. Remove the stock throttle body. Seal will be re-used. Be sure to wipe off and. Debris from the gasket. Bolt on this Enlarged Throttle Body using the stock. On the 5.7L Hemi Plastic manifolds. Take extra care when re-installing the mounting. The Speed Nut type threaded nuts can. Make sure the threads of the. Bolts are properly engaged with the nut before. Re-install the air inlet tube to the Throttle Body and air box and then tighten the clamps. Re-connect the air temperature sensor and the throttle body control motor plug. Re-connect the negative battery terminal and refer to the instruction sheet for throttle relearn procedure. Gas pedal/Throttle Body idle relearn process. With the addition of the larger bore throttle body and its larger. Intake flap, the gas pedal and throttle body must be re-synched. Before starting the engine. This must be done to prevent a check. Engine light for increased idle The procedure is simple. After installation instructions are complete, please follow the. If throttle body has already been installed, please. Just follow steps 1-4. Disconnect battery for 5 minutes. Or use a code. Reader to clear any stored codes in the computer. NOTE: If this is a new install, proceed to step 2. Turn ignition key to on position, do not start the engine. Slowly depress the gas pedal to the floor, and then slowly. Do this three (3) times. Turn the key off. The gas pedal is now in synch with the. Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. The item “Enlarged 90mm Throttle Body For 2003-2012 Dodge Ram Jeep Hemi 5.7/6.1L/6.4L V8″ is in sale since Friday, November 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Throttle Body”. The seller is “motor-emission” and is located in Las Vegas, NV. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
- Brand: Motor Emission
- California Prop 65 Warning: Warning: Cancer and Reproductive Harm www.P65Warnings.ca.gov/
- Interchange Part Number: 1782
- Warranty: 90 Day
- Manufacturer Part Number: TBI-9004
- Material: Aluminum
- Other Part Number: TBI9004
- Fitment Type: Performance/Custom